-
I-Hinge yeTorque ephezulu
1. Le damper inomthamo ophezulu we-torque kwaye ifanelekile kumatshini amakhulu nezixhobo.
2.Ingamisa nakweyiphi na indawo, nto leyo eyenza ukusebenza kwezixhobo zakho kube lula ngakumbi.
3. Ifumaneka ngentsimbi egqunywe yi-nickel kunye nentsimbi egqityiweyo emnyama.
4. Uluhlu lokusetyenziswa kwale mveliso luquka iimonitha, iiphaneli, kunye neendawo zokugcina oomatshini. Inceda ekukhuseleni ukhuseleko lomsebenzisi, ukunciphisa ingxolo yokusebenza, kunye nokuthintela izixhobo ukuba zonakaliswe yimpembelelo egqithisileyo.
-
I-Swivel Torque Hinge
1. Le mveliso ingajikeleza nge-360°.
2. Umngxuma osembindini uza ngobubanzi obahlukeneyo ukuze ulungele ukusetyenziswa ngeendlela ezahlukeneyo.
3.I-torque ephezulu, ukuya kuthi ga kwi-5 N·m.
-
I-Hinge ye-Axis ephindwe kabini
Le mveliso ivumela ukujikeleza kunye nokulungiswa kokuthambeka ngaphakathi kwento enye. Ibonisa intshukumo ye-axis ezimbini ukuze ithambeke kwaye ijike ngendlela ehlengahlengiswayo nangayiphi na i-engile. Ijikeleza i-360° epheleleyo kunye nemida yokuzikhethela kuluhlu lokujika kunye nokuthambeka.Iqinisekisa i-torque ezinzileyo kuzo zombini iindlela.
-
Iihenjisi ezifihliweyo
Le hinge inoyilo olufihlakeleyo, oluhlala lufakelwa kwiingcango zekhabhathi. Ayibonakali ngaphandle, inika inkangeleko ecocekileyo neyonwabisayo. Ikwabonelela nge-torque ephezulu.
-
I-Torque Hinge I-Hinge yoMnyango
Le torque hinge iza kwiimodeli ezahlukeneyo ezinoluhlu olubanzi lwetorque.
Isetyenziswa kakhulu kwiintlobo ezahlukeneyo zeeflephu, kuquka iikhabhathi ezijikelezayo kunye nezinye iiphaneli ezivula ngokuthe tye okanye ngokuthe nkqo, zibonelela ngokhuseleko lokudambisa ukuze isebenze kakuhle, ngokusebenzayo, nangokukhuselekileyo. -
I-Torque Hinge Yima simahla
Le hinge yedamper inoluhlu lokudambisa oluqala kwi-0.1 N·m ukuya kwi-1.5 N·m kwaye ifumaneka kwiimodeli ezinkulu nezincinci. Ifanelekile ngokupheleleyo kwiimveliso ezahlukeneyo, iqinisekisa intshukumo egudileyo nelawulwayo, iphucula umgangatho uwonke kunye namava omsebenzisi wemveliso yakho.
-
I-Config Torque Hinge TRD-XG
1. I-Torque hinge, uluhlu lwe-torque: 0.9–2.3 N·m
2. Ubukhulu: 40 mm × 38 mm
-
Isixhobo sokudambisa ipiyano sasePearl River
1. Le damper yepiyano yenzelwe ukusetyenziswa nePearl River Grand Pianos.
2. Umsebenzi wale mveliso kukuvumela isiciko sepiyano ukuba sivale kancinci, ukuthintela ukwenzakala komdlali. -
I-Damper ye-Torque ephezulu yokuFriction 5.0N·m – 20N·m
● Imveliso Ekhethekileyo
● Uluhlu lweeTorque: 50-200 kgf·cm (5.0N·m – 20N·m)
● I-Angle yokusebenza: 140°, I-Unidirectional
● Ubushushu bokusebenza: -5℃ ~ +50℃
● Ubomi beNkonzo: Iibhayisekile ezingama-50,000
● Ubunzima: 205 ± 10g
● umngxuma wesikwere
-
I-Friction Damper FFD-30FW FFD-30SW
Olu luhlu lweemveliso lusebenza ngokusekelwe kumgaqo wokungqubana. Oku kuthetha ukuba utshintsho lobushushu okanye isantya alunampembelelo ingako okanye alunampembelelo kwi-damping torque.
1. I-damper ivelisa i-torque kwicala lewotshi okanye kwicala elichasene newotshi.
2. I-damper isetyenziswa enomlinganiselo we-shaft oyi-Φ10-0.03mm ngexesha lokufakelwa.
3. Isantya esiphezulu sokusebenza: 30 RPM (kwicala elifanayo lokujikeleza).
4. Ubushushu bokusebenza
-
I-Miniature Self-Locking Damper Hinge enobude obuyi-21mm
1. Le mveliso iphumelele uvavanyo lokutshiza ityuwa engathathi cala oluthatha iiyure ezingama-24.
2. Umxholo wezinto ezinobungozi zemveliso uhambelana nemigaqo yeRoHS2.0 kunye ne-REACH.
3. Le mveliso inokujikeleza okungama-360° simahla kunye nomsebenzi wokuzitshixa ngokwawo kwi-0°.
4. Le mveliso inikezela ngoluhlu lwe-torque oluhlengahlengiswayo lwe-2-6 kgf·cm.
-
Indawo yokuDamper Hinge yokuma ngokungacwangciswanga
● Kwiikhabhathi ezahlukeneyo zeswitshi, iikhabhathi zokulawula, iingcango zekhabhathi, kunye neengcango zezixhobo zoshishino.
● Izinto eziphathekayo: Intsimbi yekhabhoni, unyango lomphezulu: I-nickel enobuhlobo nokusingqongileyo.
● Ufakelo lwasekhohlo nolwasekunene.
● I-torque ejikelezayo: 1.0 Nm.
