IiBuffers zeRotary zePlastiki ezincinci ezineGiya le-TRD-TG8 kwiMoto Umfanekiso oPhambili obonisiweyo

IiBuffers zeRotary zePlastiki ezincinci ezineGiar TRD-TG8 ngaphakathi kwiMoto

Inkcazo emfutshane:

1. Isixhobo sethu esitsha sokulawula intshukumo esincinci soomatshini yi-Two-Way Rotational Oil Viscous Damper eneGear.

2. Le damper incinci kwaye igcina indawo, yenzelwe ukuba kube lula ukuyifakela. Nceda ujonge umzobo weCAD ofanelekileyo ukuze ufumane iinkcukacha ezithe vetshe.

3. I-damper inamandla okujikeleza angama-360-degree, nto leyo evumela ukusetyenziswa ngeendlela ezahlukeneyo kwiintlobo ngeentlobo zezicelo.

4. Uphawu lwethu lwee-dampers zegiya zeplastiki yindlela ezisebenza ngayo macala omabini, nto leyo evumela ukuhamba okugudileyo kumacala omabini.

5. Le damper yegiya yenziwe ngomzimba weplastiki ohlala ixesha elide kwaye izaliswe yioyile ye-silicone ekumgangatho ophezulu. Inika uluhlu lwe-torque oluqala kwi-0.1N.cm ukuya kwi-1.8N.cm.

6. Ngokufaka le damper yesi-2 kwinkqubo yakho yoomatshini, unganika umsebenzisi wokugqibela amava anobuhlobo nokusingqongileyo, angenazo iintshukumo ezingafunekiyo okanye iintshukumo ezikhawulezileyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iinkcukacha zeeDampers zeGear Rotary

A	Bomvu	0.3±0.1N·cm
X		Yenzelwe wena

Umzobo weeDampers zeGiya

Iinkcukacha zeeDampers zeGear

Izinto eziphathekayo
Isiseko	PC
I-Rotor	I-POM
Isigqubuthelo	PC
Izixhobo	I-POM
Ulwelo	Ioyile yesilicon
I-O-Ring	Irabha yesilicon

Ukuqina
Ubushushu	23℃
Umjikelo omnye	→1.5 indlela ngokwewotshi, (90r/min) → Indlela e-1 ngokuchasene newotshi, (90r/min)
Ubomi bonke	Imijikelo engama-50000

Iimpawu zeDamper

1. Isantya sokujika xa kuthelekiswa nesantya sokujika kwiqondo lobushushu begumbi (23℃)

I-torque ye-oil damper iyatshintsha xa isabela kwisantya sokujikeleza, njengoko kuboniswe kumzobo ohamba nayo. Ukwandisa isantya sokujikeleza kubangela ukunyuka okufanayo kwe-torque.

2. I-Torque vs Ubushushu kwiSisantya sokuJikelezisa esiQhelekileyo (20r/min)

I-torque ye-oyile damper ichaphazeleka kukutshintsha kobushushu. Ngokubanzi, njengoko ubushushu buncipha, i-torque ithanda ukunyuka, kwaye njengoko ubushushu busanda, i-torque ithanda ukwehla. Le patheni iyasebenza xa kugcinwa isantya sokujikeleza esingaguqukiyo se-20r/min.