IiDampers zePlastiki ezijikelezayo zeBarrel ezisebenzisa iindlela ezimbini iDamper TRD-TF12 Umfanekiso obonisiweyo

IiDampers zePlastiki zeBarrel Rotary Damper zeendlela ezimbini TRD-TF12

Inkcazo emfutshane:

I-damper yethu encinci ejikelezayo enamacala amabini, yenzelwe ukubonelela ngolawulo lwamava okuvala athambileyo nagudileyo. Ngoyilo oluncinci, le damper ethambileyo evalayo kulula ukuyifaka kwiindawo ezincinci, nto leyo eyenza ukuba ilungele ukusetyenziswa ngeendlela ezahlukeneyo.

1. Nge-engile yokusebenza engama-360-degree, inika ukusebenza okuguquguqukayo kwiimveliso ezahlukeneyo. I-damper ingasebenza kwicala lewotshi nelichasene newotshi, inika ukuguquguquka kunye nokulula.

2. Yenziwe ngomzimba weplastiki kwaye izaliswe yioyile ye-silicone, inika ukusebenza okuthembekileyo kunye nokuqina. Ngoluhlu lwe-torque lwe-6 N.cm, iqinisekisa ukudambisa okusebenzayo kwiindawo ezahlukeneyo.

3. Ubuncinane bobomi buyimijikelo engama-50,000 ngaphandle kokuvuza kweoyile. Yenza impembelelo encinci kunye neentshukumo ezithambileyo ngenkqubo yethu yokuvala ethambileyo.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazelo yeDamper yokujika yeBhareli

I-Torque
1	6.0±1.0 N·cm
X	Yenzelwe wena

Qaphela: Ilinganiswe kwi-23°C±2°C.

Umzobo weDamper yeBhareli yeDashpot yeCAD

Uphawu lweDampers

Izinto zeMveliso
Isiseko	I-POM
I-Rotor	PA
Ngaphakathi	Ioyile yesilicone
Indandatho enkulu ye-O	Irabha yesilicon
I-O-ring encinci	Irabha yesilicon

Ukuqina
Ubushushu	23℃
Umjikelo omnye	→Indlela enye ngokwewotshi,→ Indlela e-1 echasene newotshi(30r/min)
Ubomi bonke	Imijikelo engama-50000

Iimpawu zeDamper

Isantya sokujikeleza xa kuthelekiswa nesokujika (kubushushu begumbi: 23℃)

I-torque ye-damper yeoyile itshintsha ngesantya sokujika njengoko kubonisiwe kumzobo. I-torque iyanda ngesantya sokujika iyanda.

I-Torque vs ubushushu (isantya sokujikeleza:20r/min)

I-torque ye-damper yeoyile itshintsha ngokweqondo lobushushu, ngokubanzi i-Torque iyanda xa ubushushu buncipha kwaye iyancipha xa ubushushu bunyuka.

Isicelo se-Barrel Damper

Ii-barrel dampers zingasetyenziswa kakhulu kwiindlela ezahlukeneyo. Eyona meko iqhelekileyo kukuba zingasetyenziswa kakhulu ngaphakathi kweemoto ngenxa yendlela yazo ethambileyo yokuvala okanye evulekileyo, efana nophahla lwemoto, isiphatho sezandla, indawo yokubeka ingalo yemoto, isiphatho sangaphakathi kunye nezinye izinto zangaphakathi zeemoto, iBracket, njl. Kukho izinto ezintsha ezingakumbi kubayili beetalente abasebenza kuzo.

Ngaphambili: Ii-Small Barrel Plastic Rotary Shock Absorbers Two Way Damper TRD-TE14

Okulandelayo: Iindlela ezimbini ze-TRD-TF14 Soft Close Plastic Rotary Motion Dampers

Bhala umyalezo wakho apha uze uwuthumele kuthi