IiDampers zePlastiki zeRotary Barrel Damper ezineendlela ezimbini TRD-FB

Inkcazo emfutshane:

Le yidamper encinci ejikelezayo enamacala amabini

● Ukugcina indawo encinci kunye nendawo yokufakela (jonga umzobo we-CAD ukuze ufumane ireferensi yakho)

● I-angle yokusebenza ye-360-degree

● Icala lokufutha ngeendlela ezimbini: ngokwewotshi okanye ngokuchaseneyo - ngokwewotshi

● Izinto: Umzimba weplastiki; Ioyile yesilicone ngaphakathi

● Uluhlu lweTorque: 5N.cm- 11 N.cm okanye ngokwezifiso

● Ubuncinane bexesha lobomi – ubuncinci imijikelo engama-50000 ngaphandle kokuvuza kweoyile

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Inkcazelo yeDamper yokujika yeBhareli

5 N·cm ± 0.85 N·cm

6 N.cm ±0.85 N·cm

8 N.cm ±1.1 N·cm

10 N.cm ±1.5 N·cm

11 N.cm +2 N·cm/-1N·cm

Ivavanyiwe nge-100%

Umzobo weDamper yeBhareli yeDashpot yeCAD

Uphawu lweDampers

Izixhobo Ezininzi
I-Rotor	I-POM
Isiseko	PC
I-O-Ring	I-NBR
Ulwelo	Ioyile yesilicone
Inombolo yoMzekelo	I-TRD-FB
Umzimba	Ø 12 x 14 mm
Uhlobo lweembambo	4
Ubukhulu beembambo - ubude [mm]	1.7x1.3
Ubomi bonke	Iibhayisekile ezingama-50,000Umjikelo omnye: Indlela enye ngokwewotshi,Indlela e-1 ngokuchasene newotshi

Iimpawu zeDamper

1. Ukujikeleza nge-360° kukhululekile.

2. Ukusebenza ngcono xa uvala amaxesha amaninzi.

3. Ukuqina okuphezulu xa uxinezelekile.

Izicelo ze-Barrel Damper

Isiphatho sezandla zokushukumisa uphahla lwemoto, indawo yokubeka ingalo yemoto, isiphatho sangaphakathi kunye nezinye izinto zangaphakathi zemoto, iBracket, njl.

Ngaphambili: Iibhafa zePlastiki zeRotary Buffers ezineendlela ezimbini zeDamper TRD-FA

Okulandelayo: Iibhafa zeRotary Rotational Barrel Damper ezineendlela ezimbini TRD-BG

Bhala umyalezo wakho apha uze uwuthumele kuthi